Upgraded SMACO Mini Scuba Tank Diving Equipment 1L Oxygen Cylinder Hand Pump US

Upgraded SMACO Mini Scuba Tank Diving Equipment 1L Oxygen Cylinder Hand Pump US
Upgraded SMACO Mini Scuba Tank Diving Equipment 1L Oxygen Cylinder Hand Pump US
Upgraded SMACO Mini Scuba Tank Diving Equipment 1L Oxygen Cylinder Hand Pump US
Upgraded SMACO Mini Scuba Tank Diving Equipment 1L Oxygen Cylinder Hand Pump US
Upgraded SMACO Mini Scuba Tank Diving Equipment 1L Oxygen Cylinder Hand Pump US
Upgraded SMACO Mini Scuba Tank Diving Equipment 1L Oxygen Cylinder Hand Pump US
Upgraded SMACO Mini Scuba Tank Diving Equipment 1L Oxygen Cylinder Hand Pump US
Upgraded SMACO Mini Scuba Tank Diving Equipment 1L Oxygen Cylinder Hand Pump US
Upgraded SMACO Mini Scuba Tank Diving Equipment 1L Oxygen Cylinder Hand Pump US
Upgraded SMACO Mini Scuba Tank Diving Equipment 1L Oxygen Cylinder Hand Pump US
Upgraded SMACO Mini Scuba Tank Diving Equipment 1L Oxygen Cylinder Hand Pump US
Upgraded SMACO Mini Scuba Tank Diving Equipment 1L Oxygen Cylinder Hand Pump US

Upgraded SMACO Mini Scuba Tank Diving Equipment 1L Oxygen Cylinder Hand Pump US

Upgraded SMACO Mini Scuba Tank Diving Equipment 1L Oxygen Cylinder Hand Pump US. KNOW MORE ABOUT US & PRODUCT. Constant pressure technology: After 8 months of hard work, all the technical backbone of the company broke through many difficulties and finally tested successfully.

No matter from the constant pressure accuracy, the airflow output, the explosion safety accuracy and so on, can reach the industry-leading level. Air switch valve: Can completely shut down the air source, no air leakage when storing it, in conjunction with the constant pressure valve, it can be adjusted the discharged air amount according to the customer's request. Pressure gauge: With luminous function, 80 meters underwater still clear. Made of stainless steel, waterproof and corrosion-resistant, high hardness, compressive and durable.

The dial design is clearly visible, which can accurately distinguish the pressure value at a glance. (Note: Pay attention to the pressure indicator and stop inflating when the pressure reaches 200 bar or 3000 psi) Breathing mouthpiece: Food grade silicone gel material, safe and odor-free. Ergonomic design, easy to bite and breathe. (Note: Tighten the connection with the breathing valve to prevent air leakage) Pressure relief valve: Press with moderate force to relieve pressure easily.

Note: After entering the water, when biting the mouthpiece and prepare to inhale the air, please don't forget to gently press the pressure relief valve to relieve air a little bit and drain away water. One-way inflation valve: Double filter gas, 0.03-micron one-stage filter, polymer secondary filtration. Portable large capacity: Constant pressure respiratory stability.

Larger capacity, longer breathing time. Beginners can also dive easily. You can take it on the plane and scuba diving abroad. Constant pressure valve: Balance air pressure in the bottle, achieve constant pressure function, let the air flow out smoothly, breathing smoother.

Explosion-proof valve: External explosion-proof valve. The explosion-proof index is more accurate. High-pressure air tank: Select 6061 aviation aluminum, the surface adopts plastic spraying process, high-pressure air storage, durable, anti-seawater corrosion, 1L capacity.

360 degree rotation without any bondage, adapt to any position underwater. Applicable people: Professional diving (reserve air source), fishermen, novice diver, diving amateur, firefighters, lifeguards, etc.

Black/Orange/Green Scuba Diving Tank Kit Package includes. (Not Including Air Hand Pump). 1x SMACO Scuba Diving Tank.

1x Oxygen Tank Refill Adapter. 1x 2nd Stage Regulator with Mouthpiece & Hose.

1x Diving Glasses1x Oxygen Tank Shoulder Bag. 1x Oxygen Tank Valve (with pressure gage). Package Weight: about 3350g/7.38 pounds. Package Size:343110cm/13.3812.23.94in. Condition: Brand new, new used.

Electric air pump (refill fully about 12 min). Do not stand directly above the product during inflation. Please open the air switch valve first before you refill air into the tank after you finished, please relief the pressure valve, then take the tank off. (Max pressure of inflatable: 3000PSI/200BAR/2OMPA). Only Normal Air Hand Pump.

High pressure goes up to 4500psi; copper female connector sealed by polyfluorene ensures leak-free performance; 21.7 flexible micro-bore hose can bear up to 63MPA pressure, safeguarding your safety with superior quality. Sleek stainless steel construction brings smooth upward and downwards motion; 8mm copper female quick connector allows this pump to withstand over 10,000 times of tear and wear. Comes with oil and water separator for convenient operation; TPR padded grips for fatigue-free hand feelings, large gauge provides easy-to-read parameters.

COMPACT & FOLDABLE FOR EASY STORAGE. 5mm foldable pedal for easy storage and transport, perfect to carry it around in your vehicle for unexpected use. Precisely shows the pressure with no air leaking, you can know when to stop inflating. Use top-grade material, anti-crack, low temperature is not easy to crisp. Tighten the pressure relief screw before inflating air (clockwise). Loosen the pressure relief screw to release the air after inflation completed.

Make sure the tightness before using it. Make sure the high tightness between the connector and the air tank to avoid leaking. Connect the high-pressure pump to the scuba tank. Close the pressure relief valve. Start to inflate and stop inflating when the air pressure reaches to 3000 psi or 200 bar.

Open the pressure relief valve to relieve pressure. Pull out the scuba tank, and the inflation is completed. Net weight: about 2.5KG/5.51 Pounds. Separator (L x W): approx.

9 x 3.1cm/3.54 x 1.22 inch. We highly recommend inflating your air tank by air compressor machine, the air pump just for emergency use. Only Upgraded Air Hand Pump. The pumping efficiency is increased by 20%. Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder.

With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating.

Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise).

Non-explosive tube: it's made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump.

Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch.

1 x High-pressure air pump. 1 x High pressure hose. 3 Pack x Accessoriescylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter.

The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps.

After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. Made of high-quality aluminum alloy, features high hardness and long-lasting performance. More precise connector thread, 8mm quick-connect female connector, fast install the oil-water separator in seconds.

Built-in black rubber o-ring, make sure the tightness when pumping. (Please replace the broken o-ring). Double filter of the activated carbon filter. Oil absorption, water absorption, impurities adsorption. The surface finished with non-slip texture, features comfortable touch.

Weight: about 998g/2.2 pounds. Application: PCP air compressor, scuba diving tank compressor, electric air pump, etc. Sleeve size (L x D): approx. 27 x 5.1cm/10.63 x 2.01 inch. Filter cartridge size (L x D): approx.

18 x 2.8cm/7.09 x 1.10 inch. Not Including PCP Air Compressor. If you have any inquiry regarding the item or our service, We will try to reply any message within 24 working hours. Emails may not be monitored quickly.

The item "Upgraded SMACO Mini Scuba Tank Diving Equipment 1L Oxygen Cylinder Hand Pump US" is in sale since Wednesday, June 17, 2020. This item is in the category "Sporting Goods\Water Sports\Scuba & Snorkeling\Tanks". The seller is "dst_tim" and is located in Elk Grove Village, Illinois. This item can be shipped to United States.


Upgraded SMACO Mini Scuba Tank Diving Equipment 1L Oxygen Cylinder Hand Pump US